RED‑SYS® Alkaline Industrial Cleaner

RED‑SYS® is an electrochemically activated, strongly alkaline cleaning solution with a pH value of approximately 12. It is designed for the effective removal of greasy, oily and stubborn industrial contamination. Its cleaning power is not based on a high sodium hydroxide content, but on electrochemical activation – therefore the product is not classified as a hazardous substance.

RED‑SYS® is a stable, colourless and practically odourless solution that can be used safely in industrial environments while providing strong cleaning performance.

  • Strongly alkaline pH (~12) – excellent grease-removing performance
  • Low NaOH content (0.03–0.6%)
  • Not classified as a hazardous substance according to EC 67/548/EEC
  • Not subject to ADR transport classification, non-flammable, non-explosive
RED-SYS alkaline industrial cleaner

Composition according to the safety data sheet

  • Sodium chloride: ≤ 0.5%
  • Sodium hydroxide: 0.03–0.6%
  • Hydrogen peroxide: < 0.005%
  • Production: electrochemical activation

The alkaline cleaning effect is not caused by a high NaOH content, but by electrochemical activation.

Practical experience: During longer manual cleaning, the alkaline effect can dissolve the upper lipid layer of the skin – the skin may feel “too fine” or degreased afterwards. This is a typical effect of alkaline cleaners, therefore protective gloves are recommended.

Application areas

RED‑SYS® is particularly effective in the following areas:

  • Floor and surface cleaning in workshops, service areas and garages
  • External cleaning of industrial machines and equipment
  • Removal of greasy and oily deposits
  • Cleaning of heavily contaminated industrial floors, ramps and work areas
  • Cleaning of metal and plastic surfaces
Why is RED‑SYS® effective?
  • Electrochemically activated alkaline solution
  • High pH value → strong grease-removing ability
  • Low active substance content → easier and safer handling
  • Colourless, practically odourless and stable

Technical data

FormLiquid
ColourColourless
OdourPractically odourless
pH value (20°C)~ 11.5 - 12 pH
Density1.02 g/cm³
SolubilityCompletely soluble in water
Boiling point≥ 100°C
Hazard classificationNot classified as a hazardous substance (EC 67/548/EEC)
ADR classificationNot subject to ADR classification
Water hazard classNot hazardous to water

Safety and handling

Handling
  • Store in the original packaging
  • Keep in a cool and shaded place (≤ 25°C)
  • Protect from UV light
Personal protection
  • Respiratory protection: not required
  • Eye protection: recommended
  • Hand protection: recommended in practice, as alkaline cleaners can dissolve skin lipids

Downloadable documents